FYBRAII is the second generation (Generation II) of the Automator top selling active fiber laser for marking in industrial environments. FYBRAII generates a high power laser beam from the source to the head via a flexible fiber cable. The innovative main block and the head are designed and optimized to work in a heavy duty work environment, where vibrations, disturbance and dust are very common. FYBRAII is an extremely comfortable modular system: the main box sets the source and the board with the electronic parts in two different separated areas. The galvanometers are sets, with the lenses in the head block.
The laser fiber allow a considerable increase of the power, without compromising the size of the laser spot. This pledges a better marking result at higher powers and a better efficiency of the system.
Laser type: NB:Yb 1064 nm
Security class: 4
A mechanical shutter operates together with the electronic one, for a dual security system!
Like all Automator second generation marking lasers (Gen II), FYBRAII provides a double shutter security system: a mechanical shutter, together with an electronic one, set with the Automator Safety Pack and a Safety Class 1 laser enclosure, allows the laser head to reach a SIL3 – PLE safety grade, the maximum security level in the laser marking fields. With Automator Safety Pack, the operator can work in total security with no risks.
International laws require that the laser is equipped with a mechanical locking device (shutter) for shutting the laser beam in case when the access to the marking area by an operator is needed.
An electronic shutter is not enough! It’s the mechanical shutter that makes the difference. The mechanical double-contact safety shutter physically locks the laser beam when the system spotlights an event in which safety fails or in situations where, inside cabinets, free access to the marking area is required by an operator. Low-cost lasers do not guarantee this fundamental requirement and therefore do not meet the safety regulations.
Automator original EuGENIUSTM Laser Marking Software
EuGENIUSTM Laser Marking Software has been designed and developed by Automator highly specialized team, consolidating the marked requests in the long term marking knowhow of more than 70 years in marking.
Versatile in the applications and friendly to use, even by operators without highly technical specific training, such as CAD knowledge.