The Colibrì is a portable fiber laser marking machine that delivers a laser beam from the source to the lightweight portable head through a flexible fiber cable. It’s the only portable laser marker fully compliant with Class 1 safety standards, ensuring maximum operator protection.
Fiber laser technology enables higher source power without enlarging the laser dot, guaranteeing deep, precise, and efficient markings even at high power levels.
Technical specifications:
ACCESSORIES
COLIBOX TROLLEY NOSES
.png?width=100&height=182&name=Trolley%20(1).png)
COLIBRI' is operated by Automator software that is versatile in application and easy to use, even by operators without specific technical training or CAD knowledge.
A handheld laser marker is a portable marking system designed for parts and surfaces that can't be moved to a fixed workstation. It is an essential tool for large, fixed, or hard-to-reach components.
Think of a two-meter tube, a panel already mounted on a frame, a heavy component on a pallet. In these situations, moving the part isn't an option, so the tool has to move instead.
That's exactly what the Colibrì 20-30 W was designed for.
Its compact body, balanced ergonomics, and adjustable marking head adapt to flat, curved, and angled surfaces, whether you're on the shop floor, in the field, or on an assembly line.
Class 1 laser products are considered inherently safe under normal operating conditions. The laser beam is not accessible during use, which eliminates the risk of accidental exposure.
In the handheld laser market, most portable laser systems operate at higher safety classes that require protective enclosures, laser safety glasses, or restricted work areas.
Colibrì 20-30 W is one of the few handheld laser marking machines on the market to achieve Class 1 classification.
This means:
For production managers and safety officers, this is a meaningful differentiator, especially in sectors like automotive, electronics, and medical device manufacturing where operator safety and regulatory compliance are non-negotiable.
The Colibrì 20-30 W handheld laser engraver is used across a wide range of industries wherever permanent, traceable marking is required on parts that are difficult or impossible to feed through a fixed machine.
 |
Automotive & metal fabrication | Marking of large structural components, chassis parts, and subassemblies directly on the production line. Serial numbers, part codes, and date stamps applied permanently to steel, aluminum, and treated surfaces that are resistant to heat, abrasion, and chemical exposure. |
 |
Electronics & electrical components | High-precision marking on PCBs, connectors, cables, and enclosures. The 20-30 W fiber laser produces fine, clean marks without damaging sensitive components, meeting traceability requirements for electronics manufacturing. |
 |
Medical devices & biomedical | Compliant permanent marking for instruments, equipment, and device components. The Colibrì 20-30 W laser engraver supports UDI (Unique Device Identification) marking requirements in medical manufacturing environments, where marking readability and permanence are regulated. |
 |
Maintenance, repair & field operations | Ideal for MRO (Maintenance, Repair and Operations) contexts where parts need to be marked or re-marked in situ without disassembly. |
The Class 1 safety classification of the Colibrì 20-30 W is one of the most significant product differentiators in this category. Class 1 portable laser engravers are genuinely rare, and this certification directly impacts procurement decisions in regulated industries.
The Colibrì 20-30 W meets the requirements for:
If your sector requires specific compliance documentation or you need to verify compatibility with your internal safety standards, our technical team is available to support your evaluation.
|
Fixed Laser Marker |
Colibrì 20-30 W Handheld |
|
|
Mobility |
Workpiece comes to the machine |
Machine goes to the workpiece |
|
Large/fixed parts |
Not suitable |
Ideal |
|
Safety class |
Typically Class 1 (enclosed) |
Class 1 - open use |
|
Setup time |
Installation required |
Plug and mark |
|
Field use |
Not possible |
Yes |
|
Integration |
Fixed workstation |
Flexible deployment |
Automator Marking Systems has been designing and manufacturing industrial marking solutions for over eight decades. That experience isn't just a number, it's the foundation of every product decision, from component selection to after-sales support.
Unlike vendors focused on a single technology, Automator covers the full spectrum of industrial marking: laser, dot peen, scribing, and hot stamping. This means two things for you:
The Colibrì 20-30 W is part of a complete laser marking portfolio, from benchtop systems to fully integrated production-line solutions. Whatever your volume, your material, or your marking challenge, there's an Automator solution built for it.
Contact our team for more information about Automator fiber laser marking machines.
The Colibrì 20-30 W is designed for marking metals (steel, aluminum, stainless steel, brass, titanium) as well as a range of plastics and treated surfaces. For specific material compatibility, contact our technical team.
Under normal operating conditions, Class 1 laser products do not require laser safety eyewear or physical barriers. However, we always recommend following your organization's internal safety protocols and verifying compliance with local workplace regulations.
Yes. The adjustable marking head is designed to work on flat, curved, and angled surfaces, making it suitable for pipes, profiles, and irregular geometries.
The Colibrì 20-30 W supports standard connectivity for marking data input, including direct integration with production management and traceability software. Our team can advise on integration options for your specific setup.
Automator provides full technical support throughout the product lifecycle, not just at installation. Our team is available for troubleshooting, maintenance, and application consulting, because we know that downtime costs more than the machine.
If you're evaluating handheld laser marking solutions and want to understand whether the Colibrì 20-30 W fits your application, our technical team is ready to help, whether that means a demo, a technical consultation, or a formal quotation.
.png?width=1200&length=1200&name=)
