Automator

安全参考

SMW AUTOBLOK

SMW AUTOBLOK

总是领先一步

Autoblok公司成立于1981年,作为欧洲最大的动力卡盘制造商意大利Autoblok的子公司。自1942年以来,Autoblok一直处于工程和制造最先进的工件夹紧,夹紧和模具解决方案的最前沿。

全球企业组织致力于质量,价格,技术支持和客户服务。我们的产品制造到世界上最苛刻的标准,但价格竞争性地对那些性能较差的产品。 Autoblok通过为我们的应用驱动产品线提供卓越的客户服务和技术支持,实现了持续的全球增长。

1993年,Autoblok收购了德国的SMW。这两个主要制造实体的结合产生了世界上最广泛的高品质工装夹具产品系列。现在,通过其子公司,代表和分销商独家提供,SMW AUTOBLOK客户被确保一致的,单一来源的卓越的产品性能,支持和服务。

 

Autoblok很高兴地宣布一个新产品。这里是关于它的文章。

在AP和NT卡盘(无通孔密封)的重要成功之后,在高生产过程中,零件可以用简单的径向运动(无有效下拉)夹紧,市场要求具有类似特征的新线卡盘,但开放中心。为了满足这些要求,SMW-Autoblok设计并实现了新的BP夹头系列。

 

BP卡盘保持与所有其他“夹线”卡盘相同的基本特征

恒定的润滑和保护,防止冷却液,切屑和切屑渗透
夹持力的恒定性允许更恒定的加工精度和质量
低维护
通过减少维护停机时间,提高生产率
生态学由于有限的使用润滑脂和冷却液中没有油脂污染
使用寿命长,精度高
适用于在恶劣环境中由于流体,切屑和切屑而进行加工
非常适合使用高压冷却液进行加工
经济,由于非密封卡盘的工作寿命5-10倍
 

BP卡盘的具体特点是

与BH型标准(非密封)开中心夹头相同的通孔
与具有相同通孔的圆柱型VNK完美连接
主体设计为高刚性,以减少夹紧和旋转过程中的变形
具有楔形钩的楔形楔连接到主爪的中心部分,以在卡盘主体中具有最长的主爪导向件,以最大化刚度
没有离心力补偿,但由于轻型主爪,允许高速度
锯齿形主爪爪型号BP-D(英制锯齿)或BP-M(公制锯齿)具有极大的灵活性,感谢您可以夹紧小零件(轴和杆),夹头垫安装在主爪的中心部分,大型零件(法兰)与传统上安装的顶颚
舌头和凹槽版本BP-C由于更轻的主爪更高的速度
 

BP卡盘将“密封”系列中的密封卡盘的所有优点也带到开放式中心标准卡盘上,这使得一般标准机器也可以最终使用现代化的工件夹持系统。

BP卡盘有以下尺寸:220-260-320。

Autoblok Corporation was established in 1981 as a subsidiary of Autoblok of Italy, the largest power chuck manufacturer in Europe. Since 1942, Autoblok has been at the forefront of engineering and manufacturing state-of-the-art workholding, clamping and tooling solutions.

The global corporate organization is dedicated to QUALITY, PRICE, TECHNICAL SUPPORT and CUSTOMER SERVICE. Our products are manufactured to the most demanding standards in the world, yet priced competitively to those products of lesser performance. Autoblok has achieved sustained global growth by providing a superior level of customer service and technical support for our application driven product line.

In 1993, Autoblok acquired SMW of Germany. The combination of these two premier manufacturing entities resulted in the most extensive product line of high quality workholding devices in the world. Now available exclusively through its subsidiaries, reps and distributors, SMW AUTOBLOK customers are ensured a consistent, single source of superior product performance, support and service.

 

Autoblok is pleased to announce a new product. Here is the article about it.

After the important success of the AP and NT chucks (sealed without through hole) in high production processes where the part could be clamped with the simple radial movement (no active pull down), the market requested a new line of chucks with similar features, but with open center. To fulfill these requirements, SMW-Autoblok designed and realized the new line of BP chucks.

 

The BP chucks maintain the same basic features as all other “proofline” chucks

  • Constant lubrication and protection from coolant, chips and swarf penetration
  • Constance of gripping force allowing a more constant process accuracy and quality
  • Low maintenance
  • High productivity thanks to the reduced down-time for maintenance
  • Ecological thanks to the limited use of grease and the absence of grease contamination in the coolant
  • Long service life at high precision
  • Ideal for machining in harsh environment due to fluids, chips and swarf
  • Ideal for machining with high pressure coolant
  • Economical, thanks to the operating life 5-10 longer against a non-sealed chuck

 

The specific features of the BP chucks are

  • Same through hole as the standard (non-sealed) open center chucks type BH
  • Perfect connection to the cylinders type VNK having the same through hole
  • Body designed for high rigidity for reduced distortion during clamping and rotation
  • Ring wedge with wedge-hook connected  to the central part of the master jaws to have the longest master jaw guide in the chuck body to maximize rigidity
  • No centrifugal force compensation, but allowing high speed thanks to the light master jaws
  • Serrated master jaws version BP-D (inch serration) or BP-M (metric serration) with great flexibility thank to the possibility to clamp small parts (shafts and bars) with collet pads mounted on the central part of the master jaws and to chuck large parts (flanges) with top jaws mounted traditionally
  • Tongue and groove version BP-C for even higher speeds thanks to the lighter master jaws

 

The BP chucks brings all the advantages of the sealed chucks in our “proofline” series also to the open center standard chucks, allowing also standard machines for general use to finally use a modern work-holding system.

The BP chucks are available in the following sizes: 220-260-320.

Marking technology used

Autoblok主要使用两种技术,激光与YVO4源,理想的标记金属和合金; 冲击 快速深“一击”标记 。

 

激光是电脑化技术,冲击是手动非计算机化技术。 

 

这是一个非常有趣的情况。 此外,由于其广泛和多样的生产,Autoblok在相反的杆使用技术,也使用如此不同的机器:例如,MB32作为冲击手动机; 作为Automator产品中最大的激光器。



Autoblok uses mainly two technologiee, laser with YVO4 sources, ideal to mark metals and alloys; impact for fast deep "one shot" marking.

Laser is computerized techno, impact is a manual non computerized techno.

This is a very interesting case. Also because of its wide and various production, Autoblok uses technologies at opposite poles and also using machines so different: for example, MB32 as impact manual machine; Superior as the biggest laser in Automator offer.

 

This example, to say an important concept: each application has an optimal solution, which is not necessarily the most technologically advanced.